超微粉碎如何實現均一的粒徑分布

小型實驗研究用納米干式粉碎機 超微粉碎機

NANO GETTER Laboratory Series
DMS65

photo:DMS65

● For developing new materials
● Dispersion of nano-size particles
● Ideal for making small quantity samples

More about NANO GETTER

Specifications

Model	DMS65
Motor	2.2kW
Grinding Chamber Volume	0.13L
Batch Quantity	0.2L～0.5L
Bead Diameter	φ0.05mm～0.5mm

LMZ Laboratory Series
MINICER

photo:MINICER

● Grinding and dispersion to the nano and submicron size
● The smallest size available in the standard mill LMZ series
● Micro beads can be used
● Evenly ground and dispersed particles achieved

More about LMZ

Specifications

Model	MINICER
Motor	0.94kW
Grinding Chamber Volume	0.16L
Batch Quantity	0.2L～0.5L
Bead Diameter	φ0.1mm～1.0mm

LMZ Laboratory Series
LABSTAR

photo:LABSTAR

● Grinding and dispersion to the nano and submicron size
● Desktop laboratory type that is a size bigger than MINICER

More about LMZ

Specifications

Model	LMZ06?LMZ075
Motor	3.7kW
Grinding Chamber Volume	0.6L (LMZ), 0.75L (LME)
Batch Quantity	2L ～
Bead Diameter	φ0.1mm～1.0mm

For foundational research
MINIZETA

photo:MINIZETA

● Possible to operate with minimum batch quantity among laboratory series
● Easy maintenance with simple structure

Specifications

Model	MINIZETA
Motor	0.75kW
Grinding Chamber Volume	0.3L
Batch Quantity	0.25L～0.5L
Bead Diameter	φ0.3mm～1.0mm

工作原理：
　　研磨部分在設備的底部，進料通過研磨介質產生的強烈沖擊和摩擦進行研磨。氣流從底部側面進入，經過研磨介質時可以冷卻顆粒，同時顆粒也被氣流從研磨區帶到分級區。滿足要求的細粉將會通過分級輪，剩下的大顆粒將會返回研磨區繼續研磨。

應用：
　　PULVIS 特別適合于難于研磨的溫敏材料。
　　在研磨過程中還可加入添加劑。
典型的應用如下：
　　- 電池材料 (陰極材料)
　　- 無機顏料
　　- 陶瓷材料
　　- 金屬氧化物
　　- 工業礦物
　　- 玻璃，玻璃粉
　　- 金屬氧化物（充電電池材料）
　　- 磁性材料（惰性氣體保護）
　　- 石墨（鋰電池陽極）

耐磨保護：
　　研磨部分和分級部分都可以使用陶瓷材料。